Back Crossing Latah

Started by Tim DH, 2022-09-02, 02:13:35 PM

Previous topic - Next topic

Justin Jardinier

#60
Quote from: Tim DH on 2023-01-14, 10:09:51 AMThere is no significant difference between the spat and fermented seed, which leads to the encouraging conclusion that the earlier difference in seedling vigour noted on the F1s for the People! thread IS hybrid vigour....

That's reassuring to hear. My method has been to put the seeds on kitchen paper (paper towels), then rub all the gel off. Then rinse in water, dry with paper towel, then set on a paper towel to dry for however many days before packing. I didn't want to ferment because this has been 1 fruit at a time, and in quite a few cases just 1~10 seeds from hard to cross crosses. And so many crosses. If I fermented them all, I'm sure I would loose many, maybe spill some, have some ferment for way too long, and so on. So just being able to harvest the fruit and sit down immediately to process it, has been my choice so far.

They've all been indoor crosses though. For outdoor, I'm slightly concerned about passing any disease to the seeds. Though I thought, maybe just bleaching them before germinating would be a good fix for that if there are any worries?

Regarding drying, in a place like the UK, how many days would you leave them to dry before packing? I've been putting a few dessicant balls (opened up the dessicant packets) into the seed packets just in case they needed more drying.

Quote from: William Schlegel on 2023-01-14, 12:19:21 PMI wonder if yeast alone would effectively break down the gel. I read some brewing books about a decade ago about older wilder fermentation and there are middle road options available to brewers that use some of the wilder yeast species but from a culture that gives more consistent results. That could be an interesting but perhaps odd direction to take tomato fermentation experimentation. That is buy special cultures for like a sour fruit beer from a brewing supply company then use them on tomato seed ferments?! Something like this and it turns out to be a mix of yeasts and bacteria https://homebrewing.org/products/white-labs-655-belgian-sour-mix-1

It's been a long time since I was reading about it but from memory, lambic beers are those older type, and they tend to add fruit to cover up the naturally quite sour outcome. Not sure if they might be less sealed in process (maybe turning some of the ethanol into ethanoic acid?) But anyway I thought I heard maybe it was using more wild yeasts. So perhaps one natural option could be to just add a bit of apple skin, or scrape some of the surface of a natural apple into the seed fermenting water? I think that was the source of yeast for oldschool cider making (I guess what you folk in the US call 'hard cider'). But your sourdough idea sounds like might even have pretty much the same organisms in.

Another idea might be using water from pickles, if you make lactofermented pickles. They're delicious and so easy to make, just chop things like cabbage, daikon or whatever, add a little salt, a little water if necessary or if you enjoy drinking the liquid once the process is done (also delicious), keep submerged and wait a couple of weeks. A drop of liquid from that should give a quick start to seed fermentation I should think. Since it contains salt, perhaps too much would be bad, but there must be so many (millions?) of bacteria in a drop.

Tim DH

Hi Justin,
   I've never had any trouble with tomato seed going mouldy. After the gel has been got off (by which ever method) I just separate the seeds out on a piece of scrap paper. These scraps sit on the woodburner (which is NOT in use at this time of year!) until the paper is dry. Two or three days. Next I put the seeds in little Glassine envelopes (they are cheap enough on Ebay). The envelopes sit in small chinese teacups, according to which project they belong to, for a month or more. In the Autumn the envelopes get transferred to a screw top honey jar.

Tim DH

Cathy A

I've had a lot of trouble getting the jell off. Supposedly just putting it in a container and leaving it to form mold is supposed to break down the jell, but it doesn't work for me.

On the other hand I haven't had any problems with seeds germinating even if a considerable amount of dried jell is still on the seed when it goes to storage.

What are other people doing to dissolve the jell?

Tim DH

Hi Cathy,
   I don't 'just' put the seed mush into a container. ... I add a lot of water too.

        Mine rarely gets actually mouldy, when the water goes cloudy I pour most of it off and replace it. It takes about three days to 'wash' off the jell.

Tim DH

Steph S

What Tim said.  Especially when saving from a single tomato, there's not enough juice, so a bit of water to make a volume that seeds can settle out of.  With a glass jar, you can look at the bottom and see if the clean seeds are settling out, usually 3 days is good.  If a cap is present, I flip it out and check for seeds stuck to the bottom, which can happen if it's shallow. Otherwise if just cloudy add some water, stir and decant a few times to get your clean seed that collected at the bottom.

Justin Jardinier

Quote from: Tim DH on 2023-07-27, 01:16:03 PMI put the seeds in little Glassine envelopes
Cool. Is that water permeable? I.e. can the seeds continue drying in that? If so perhaps I will switch to that, having so many seeds lying on kitchen paper allows them to accumulate dust, and does pose a risk of getting knocked/mixed.

Quote from: Cathy A on 2023-07-27, 02:09:55 PMI've had a lot of trouble getting the jell off. Supposedly just putting it in a container and leaving it to form mold is supposed to break down the jell, but it doesn't work for me.

You might not like my method since it doesn't use fermentation so does have disadvantages in terms of disease elimination. But, I find it to be good for complete gel removal. First step is I use kitchen paper (that might have a different name in other countries, but it's the strong absorbent paper towels we use in kitchens) to remove the majority of the liquid. Then I put on dry kitchen paper, and rub it in between, folded over. If there are not too many seeds, the friction of the paper removes the gel. This can also be done with very cheap microfibre towels like one I got in the kitchen section of a supermarket, it has even better friction. May have to move the seeds around a bit if an area of the towel gets too much gel in it. For small batches (single domestics or a few wilds) this has been working well for me.

Tim DH

Hi Justine,
   I had always assumed that the Glassine envelopes were water permeable. But following your question, I dropped one drip of water into an envelope last night. The envelope quickly went limp and wrinkly. This morning it is stiff and dry again, tho still wrinkly. (The glue on the envelope, holding it together, does not appear to have migrated in any way)

Tim DH

Justin Jardinier

Hmm... well the limp part sounds promising at least. I guess I also mispoke - the critical thing would be if it lets out... humidity. Like Gor-tex for example is waterproof but breathable. Actually I think even the little plastic ziplock bags let humidity in, which is annoying since I want them to keep dry seeds dry! But at a slow rate, so no good for putting seeds in before properly dry. Hmm... maybe even simple small paper envelopes would be a good solution. Or I might just continue using the plastic ones but with a few grains of desiccant in them like I've been doing, unless someone has a better idea.

Mica Winnower

I also add water when letting the seed gel ferment to remove the seeds.

I've been storing my seeds with a little 2-gram silicon desiccant pack in the packages, just to be extra secure that we don't get any humidity buildup.

Tim DH

F4 seed planted today. ...

Nine seeds from each of two fruits from two different mothers. I only need one Potato Leaf seedling to continue.

I also planted some Latah on the assumption that my greenhouse Latah may have ceased flowering before I have flowers on a Potato Leaf plant.

Hopefully I'll have F5 seed before November is out. (It should be nominally 87% Latah)

Steph S


Tim DH

I've failed! Trying to raise three generations (3G) in a year.

I had very poor germination from the first collection of F4 seed, and non of them were potato leaved.

Still. ... I'm not too discouraged. I've got plenty of F4 seed to start in January.

I reckon the 3G race was lost last January/February, with the low light levels in my propagator. I'll hopefully have that fixed before the year is out.

Tim DH

Justin Jardinier

Quote from: Tim DH on 2023-09-03, 02:33:34 PMI've failed! Trying to raise three generations (3G) in a year.
Cool, how are you doing that, growing indoors? I just harvested my first fruit pollinated from a plant I grew out from a cross I made earlier this year. So at least I'm on the 2nd cycle this year for some. More 2nd gen fruits ripening. That's inside, trying to get F2 seeds and double crosses and maybe triple crosses ready for next year planting outside. Some fruits growing now are a mix of 6 species.

Tim DH

Happy New Year!
I re-started the F4 seed today. Aiming, once again, to complete three generations in a year. The propagator now has some supplementary lighting. (Which a little forest of citrus seedlings are currently enjoying.) Hopefully that will fix last year's oedema problems.

Tim DH

Roland

Do u still select on indeterminate  plants, or only potatoleaves and hope there is no crossover?
And how do u select for indeterminate growth? (i asumme it will take some time before u know?)
Netherlands