Back Crossing Latah

Started by Tim DH, 2022-09-02, 02:13:35 PM

Previous topic - Next topic

Justin Jardinier

Quote from: Tim DH on 2023-07-27, 01:16:03 PMNext I put the seeds in little Glassine envelopes (they are cheap enough on Ebay).

I was just looking at these as re-reading this reminded me. I've been using plastic bags since it's so handy that they're resealable, but I might switch to these glassine ones. Do you use the 'open top', 'self-seal', or 'Peel & Seal' type? As for the sealing, can they be opened to get a few seeds and re-sealed easily enough, or, like they tear the paper when doing that?

Thanks!

Joseph Lofthouse

Quote from: Roland on 2024-01-02, 04:26:18 PMAnd how do u select for indeterminate growth?

The stem terminates in a flower cluster.

Tim DH

Hi Roland,
       I've only selected on Potato Leaves and so far they've all come up indeterminate. Just to be on the safe side, I always select two Potato Leaves!

Hi Justine,
       I use the open top envelopes. The material (glassine) takes a good crease and back folding a corner pretty well locks the envelope closed.

Tim DH

Justin Jardinier

Thanks Tim, that's a great tip! I will try like that.

Tim DH

Seventeen F4 seedlings are up. Four of them are potato leaved, so spot on ratio this time, only three of them are in the same pot!

They'll have to manage without the bottom heat for a couple of days, since the new resin printer requires more warmth than our house ordinarily supplies! I read nothing about such a requirement BEFORE buying said printer. ...  Grrrr

Roland

The seedlings look thin.
I would say more light and less heat or cooler nights.
Netherlands

Tim DH

#81
Hi Roland,
     You are right, thin seedlings. ... and things got worse! My main growlight failed. I immediately ordered a replacement and got sent the wrong thing, a white light not a growlight. They were very apologetic and sent me a replacement replacement which was a different wrong thing!!
     Many times a year I am grateful that I am not a subsistence farmer (Dependent on my crops.)

    Hopefully now that we are past Candlemass, lighting will become less of an issue.


Tim DH

Quote from: Justin Jardinier on 2024-01-04, 05:14:31 AMThanks Tim, that's a great tip! I will try like that.

AND Another thing. ... Glassine Envelopes don't suffer from static! I've just lost a precious seed chasing it round an electrically charged plastic envelope!!!  Grrrrrr

Maf

Call me old fashioned, but give be brown paper coin envelopes any day of the week!

Tim DH

Not updated this thread for a while. Here is plenty of the (presumed) F6 seed, so past half way!
IMG_5611_edited.jpg
Only managed two generations in the year again. Maybe I'll ask Father Christmas for a new propagator (with integral lighting).

The F6 should be notionally 87% Latah and (a quarter) potato leaved, so I might try actually growing some of it as a crop next year, just to see.

Tim DH

Roland

I'm curious what differences you will find in fruit quality due to the potato leaves?
Netherlands

Roland

Oh I see that your F6 is actually only BC2 and so you are not yet above 95% with backcrossing to Latah.
Netherlands

Tim DH

Yes Roland,
    F6 is generation two of the second backcross, to recover the potato leaf. F7 will be seed of the third backcross.

Meanwhile: The new Propagator, a small 'Vitapod', complete with 32W of LED lights, has arrived.

I'll start the F6 off (with some Latah) on Jan 1st. Hoping (once again) to get through three generations in the year.......

Incidentally, I have been very pleased with the previous Vitapod, the base of which now resides (almost) permanently under the 3D printer. I'm thinking I might press it into service as a healing chamber when it comes to grafting time.

Roland

You can grow twice as fast, especially when you select for a characteristic that is already visible during the seedling stage. Potato leaves can be recognized approximately 2 weeks after sowing.

How to proceed:
You grow 5 backcross plants, there is a more than 90% chance that 1 of these will be a carrier of the potato leave gene. (I know that the first BC will be 100% carrier, but the subsequent generations will only be 50% if you apply my method)
You cross each of the 5 backcross plants with a potato leave parent. This is the BC test generation.

And at the same time you cross another flower of the BC with Lathal.

First you sow the seeds of each of the 5 BC test generation to determine which of the 5 BC plants is the carrier of the potato leave gene.

Once you know this, only continue with these seeds from the carrier BC x Lathal seeds. And sow 5 plants again.

So you remove the entire test generation after 2 weeks.

This allows you to directly breed a BC generation without first breeding a Selfing generation and crossing it back.
Netherlands

KaguyaCloud

With regards of your set up, I would like to recommend that you elevate the seedlings about 2-3 inches(5-7cm) from the light if possible from the top of the leaves. Light intensity decreases exponentially the further it is from the source, so it's likely your seedlings look so thin due to lack of light intensity.