Back Crossing Latah

Started by Tim DH, 2022-09-02, 02:13:35 PM

Previous topic - Next topic

Tim DH

Hi Kaguya,
   Thanks for the tip. I have little experience of growing with lights. Raising the seed trays within the propagator shouldn't be a problem.

Hi Roland,
   That is a great suggestion. It does require me to grow a few more plants, but I'm tempted to try it! The only alteration I'd make to your idea is to ditch the PL parent, and just let the test generation set a selfed fruit. That's one less plant I have to find space for AND a whole load of manual crosses that won't need doing! Seed from the selfed fruit of a PL carrying test plant should give a quarter PL seedlings which is easy enough to spot.

   I guess there is a slight chance that the PL gene might detach from the Indeterminate gene, but given that I'll be growing all the test plants to first (2) fruit size, I'll know about it. A determinate PL might be an interesting thing anyway.

Tim DH

Roland

Yes its posible to ditch the PL parent, but then u need more selfed seedling to find if the BC is a carrier for PL.
U can grow seedslings very close: 2,5 cm space is enhoug to find PL in the first 2 weeks.
Netherlands

ThomatoGarden

Hello Tim.
when growing under artificial light, the temperature is very important!
Best Temperature is between 18 and 20 °C! Dependant of the Size of the Container you use
give a bit liquid fertilizer early on and later more.
repot as early as possible to not interrupt root growth.
Exp.: My plants are now 12 cm in a 0,5 l Container and will be put in a 10l Container soon.

Greetings Thomas

Tim DH

Hi Thomas,
   Happy New Year!!!

   We are on a half hour tariff for electricity, which varies according to supply and demand. Last night it was quite windy, so much so that I actually got paid to use the stuff from 10:30pm. With the wife away (tho' with her agreement) I turned the kitchen over to microwaving compost!!

Dec31Tarr_edited.jpg

   This morning I sowed the first toms of 2025 in still warm compost... .... I've set the propagator to 210C for germination, I'll drop it to 190C once they show.

   I'm thinking of using the growlights as supplementary lighting since the propagator is in a bright window. Looking at the figures for 2024. ... I think I'll set the growlights to come on overnight.

Average365_edited.jpg

Tim DH


Tim DH

   First fruit picked today! (Actually, for a number of reasons, its the only fruit!) It shouldn't take long for me to find out if the cross worked. 'Hybrid' seed in this F7 generation will be regular leaved (the mother was potato leaved.)

   Harvesting seed by spitting the pips is MUCH quicker than fermenting. The F7 seed is already planted!

IMG_5921_edited.jpg

Summary so far:
F1 seed was Latah x Bloody Butcher (all seedlings regular leaf)
F2 seed was a self of the above to reclaim the Potato Leaf (approx a quarter of the seedlings)
F3 seed was a PL F2 x Latah  the first back cross (all seedlings regular leaf)
F4 seed was a self of the above to reclaim the PL
F5 seed was a PL F4 x Latah, the second back cross.
F6 seed was a self of the above.
F7 seed is, hopefully, F6 x Latah, the third back cross. Which should be notionally 93.75% Latah, but indeterminate.
F8 seed will be a self of the above to regain the PL

   I agree that Roland's suggestion to miss out a generation (above) is a neat trick on paper, but I'm not sure that in the bustle of a growing season I'd stay on top of it. So I'm going to keep on plodding in the above fashion for one more cycle. To get to a line which is Indeterminate, Potato Leaved and notionally 96.875% Latah in F10.

   It took 110 days to get from F6 seed to F7 seed, so this year I am in with a chance of squeezing three generations into a year.

Tim DH

Roland

Youre F generation notification is a bid strange but youre calculations are correct:

F1 = 50% Latah
F2 = F2 = 50% Latah
F3 = BC1 = 75% Latah
F4 = BC1S1 = 75% Latah
F5 = BC2 = 87,5% Latah
F6 = BC2S1 = 87,5% Latah
F7 = BC3 = 93,8% Latah
F8 = BC3S1 = 93,8% Latah
F9 = BC4 = 96,9% Latah
F10 = BC4S1 = 96,9% Latah

To create a new tomato variety, they say you need to reach F7 (99.2%), which is equivalent to BC6. Hence I would go up to BC5 or even BC6 (99.2%).


It will be realy nice to grow alle plants togetther and compare them, show us the differences between:
Latah, BC4S1, BC5S1, BC6S1
Netherlands

Tim DH

Hi Roland,
   Thanks for your notation. That is neater than mine!

   I think the F7 you refer to for creating a new variety relates to the normal process of selfing a line until it is stable. The situation with a back cross is a little more complicated! Because I'm constantly selecting for a couple of non Latah traits, then I will also be favouring other non Latah genetic material that is near them on the chromosome.

   Fortunately for me, both traits are reportedly very close together on the same chromosome (C6) So, for this chromosome, I will not get the theoretical percentage of Latah with each backcross.
 
   For my purposes, I'll be happy to get to BC4S1 and trial that against Latah. If I like it, I can always take it a couple of stages further at a later date. All of the generations look different to Latah, because it is determinate and they are indeterminate. (My 'finished' generation will also be potato leaf.)

   To be honest, since starting this project, I've got FAR more excited about creating F1s than stabilising OPs!  'Hatal' (the name I will be using from BC4S1 onwards) will have to be pretty special to knock 'PotemkinF1' out of my growing schedule. In fact, it has occurred to be that Hatal's only use, going forward, might be to produce a PL version of PotemkinF1 !!!

Tim DH

Tim DH

The fruit on the F7 (BC3) plants don't contain many seeds!  I've finally collected enough F8 ( BC3S1 ) to stand a reasonable chance of recovering Potato Leaved plants this year AND have spare seed just incase I fail to get F9 (BC4) seed before the end of the season.